Filter
Top Products
2. Remove the six rubber screw covers.
3. Remove the captive screw and the five screws securing the display bezel.
4. Using your fingertips, carefully pry up the inside edge of the display bezel.
5. Remove the display bezel.
Replacing the Display Bezel
1. Realign the display bezel over the display panel, and gently snap into place.
2. Replace the five screws and tighten the captive screw.
3. Replace the six rubber screw covers.
4. Replace the display assembly (see Replacing the Display Assembly).
Display Panel
Removing the Display Panel
1. Remove the display assembly (see Removing the Display Assembly).
2. Remove the display bezel (see Display Bezel).
3. Remove the two screws securing the display panel.
4. Remove the two screws securing the inverter board.
1
display bezel
2
screws (5)
3
rubber screw covers (6)
4
captive screw