Back to Contents Page
Power Board
Dell™Inspiron™1545ServiceManual
Removing the Power Board
Replacing the Power Board
Removing the Power Board
1. Follow the instructions in Before You Begin.
2. Remove the center control cover (see Removing the Center Control Cover).
3. Remove the keyboard (see Removing the Keyboard).
4. Lift the cable connector latch that secures the power board cable to the connector on the system board and remove the cable.
5. Use a plastic scribe or screwdriver to pry the power board off the computer.
6. Lift the power board off the computer.
Replacing the Power Board
1. Replace the power board.
2. Slide the power board cable into the cable connector on the system board and press down on the cable connector latch that secures the power board
cable to the system board connector.
3. Replace the keyboard (see Replacing the Keyboard).
CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as a connector on the back of the computer).
NOTICE: To help prevent damage to the system board, remove the main battery (see Before Working Inside Your Computer) before working inside the
computer.
NOTICE: Onlyacertifiedservicetechnicianshouldperformrepairsonyourcomputer.DamageduetoservicingthatisnotauthorizedbyDell™isnot
covered by your warranty.
NOTICE: Be extremely careful when removing the power board. The power board is glued to the computer. Do not pull on the cable to loosen the
power board.
1
cable connector
2
cable pull-tab
3
power board