Dell 1950 Laptop User Manual


 
Running the System Diagnostics 113
Selecting Diagnostics Options
Use the
Diagnostics Options
area to select how you want to test a device. You can set the following options:
Non-Interactive Tests Only
— When checked, runs only tests that require no user intervention.
Quick Tests Only
— When checked, runs only the quick tests on the device. Extended tests will not run
when you select this option.
Show Ending Timestamp
— When checked, time stamps the test log.
Test Iterations
— Selects the number of times the test is run.
Log output file pathname
— When checked, enables you to specify where the test log file is saved.
Viewing Information and Results
The tabs in the
Customize
window provide information about the test and the test results. The following tabs
are available:
Results
— Displays the test that ran and the result.
Errors
— Displays any errors that occurred during the test.
Help
— Displays information about the currently selected device, component, or test.
Configuration
— Displays basic configuration information about the currently selected device.
Parameters
— If applicable, displays parameters that you can set for the test.