Filter
Top Products
See Solving Problems for more information.
UsingtheDell™Soundbar(Optional)
or
When the monitor does not support a particular resolution mode you will see the following
message :
This means that the monitor cannot synchronize with the signal that it is receiving from the
computer. See Monitor SpecificationsfortheHorizontalandVerticalfrequencyrangesaddressable
by this monitor. Recommended mode is 1920 X 1200.
YouwillseethefollowingmessagebeforetheDDC/CIfunctionisdisabled.
WhenmonitorentersPowerSavemode,thefollowingmessageappears:
Activate the computer and wake up the monitor to gain access to the OSD
If you press any button other than the power button one of the following messages will appear depending on the selected input:
VGA / DVI-D input
Video Input
or
In PIP mode, when the monitor does not sense the selected second signal input, one of the following messages will appear depending upon the selected
input as long as the OSD screen is closed.
1.VGA
2. DVI-D
3. S-Video
4. Composite
or
or
or
or
If either VGA or DVI-D input is selected and both VGA and DVI-D cables are not connected, a floating dialog box as shown below appears.
or
NOTE: When the cable is connected back to the input of the monitor, any active PIP/PBP window will disappear. Please enter PIP/PBP
submenu to bring back the PIP
NOTE: The PIP/PBP functions can bring up a picture from a second image source. Thus you can watch images from 1 PC source (D-
Sub or DVI) and 1 Video Source (Composite or S
functions will not allow for 2 PC sources or 2 Video sources to perform PIP/PBP.