Filter
Top Products
Installing the Hard Drive
1. Insert the hard drive into the hard-drive bracket.
2. Connect the hard-drive cable to the hard drive and align the hard drive to its slot on the computer.
3. Install:
a. back cover
b. stand
c. stand cover
4. Follow the procedures in After Working Inside Your Computer.
Removing the Convertor Board
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a. stand cover
b. stand
c. back cover
3. Disconnect the cables from the convertor board. Remove the screws and lift the convertor board
from the computer.
15