Filter
Top Products
Installing the System-Board Shield
1. Align the system-board shield on the system board. Tighten the screws to secure it to the computer.
2. Install:
a. back cover
b. stand
c. stand cover
3. Follow the procedures in After Working Inside Your Computer.
Removing the Heatsink
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a. stand cover
b. stand
c. back cover
d. system-board shield
3. Perform the following steps as shown in the illustration:.
a. Remove the screw that secure the heatsink to the computer [1].
b. Remove the screws that secure around CPU to the computer [2].
c. Lift and remove the heatsink from the computer [3].
18