Filter
Top Products
Installing the Convertor Board
1. Tighten the screws to secure the convertor board to the computer. Connect the cables to the
convertor board.
2. Install:
a. back cover
b. stand
c. stand cover
3. Follow the procedures in After Working Inside Your Computer.
Removing the Memory
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a. stand cover
b. stand
c. back cover
3. Perform the following steps as shown in the illustration:
a. Slide to release the memory cover from the computer [1].
b. Remove the memory cover from the computer [2].
16