Filter
Top Products
a. stand cover
b. stand
c. back cover
d. System-board shield
e. VESA bracket
3. Perform the following steps as shown in the illustration:
a. Disconnect the system-fan cable from the system board [1].
b. Remove the screws that secure the system fan [2].
c. Remove system fan from the computer [3].
Installing the System Fan
1. Align the system fan with the heatsink on the computer and tighten the screws to secure it to the
computer.
2. Connect the system-fan cable to the system board.
3. Install:
a. VESA bracket
b. system-board shield
c. back cover
d. stand
e. stand cover
4. Follow the procedures in After Working Inside Your Computer.
Removing the Power-Switch Board
1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a. stand cover
b. stand
c. back cover
3. Peel the tape that secures the power-switch board to the computer. Lift the power-switch board to
access the cable.
23