Filter
Top Products
Installing The Input/Output (I/O) Panel
1.Insert the I/O panel into the slot on the chassis front.
2.Slide the I/O panel towards the left of the computer to secure to the
chassis.
3.Tighten the screw to secure the I/O panel to the chassis.
4.Connect the I/O panel or the FlyWire cable to the system board.
5.Thread the I/O panel or the FlyWire cable into the fan-shelter clip and the
routing on the heat sink.
6.Install the
drive cage
.
7.Install the
front bezel
.
8.Install the
cover
.
9.Follow the procedures in
After Working Inside Your Computer
.
39