General
•Device Information: Displays SATA-0, SATA-1, SATA-2,
SATA-3, and LOM MAC Address.
Boot SequenceAllows you to specify the order in which the computer attempts
to find an operating system from the devices specified in this
list.
•USB Storage Device
•CD/DVD/CD-RW Drive
•Onboard NIC
Date/TimeAllows you to set the date and time settings. Changes to the
system date and time take effect immediately.
System Configuration
Integrated NICAllows you to enable or disable the integrated network card.
You can set the integrated NIC to:
•Disabled
•Enabled (default(
•Enabled w/PXE
•Enabled w/ImageServer
NOTE: Depending on the computer and its installed devices,
the items listed in this section may or may not appear.
Serial PortAllows you to set the serial port settings. You can set the serial
port to:
•Disabled
•Auto
•COM1
•COM2
•COM3
•COM4
NOTE: The operating system may allocate resources even
though the setting is disabled.
SATA OperationAllows you to configure the operating mode of the integrated
hard drive controller.
58