Filter
Top Products
Power Management
Auto On TimeSets time to automatically turn on the computer. Time is kept in
standard 12-hour format (hour:minutes:seconds). Change the
startup time by typing the values in the time and AM/PM fields.
NOTE: This feature does not work if you turn off your
computer using the switch on a power strip or surge
protector or if Auto Power is set to disabled.
Deep Sleep ControlAllows you to define the controls when Deep Sleep is enabled.
•Disabled
•Enabled in S5 only
•Enabled in S4 and S5
This option is Disabled by default.
Fan Control OverrideControls the speed of the system fan. This option is disabled by
default.
NOTE: When enabled, the fan runs at full speed.
Wake on LANThis option allows the computer to power up from the off state
when triggered by a special LAN signal. This feature only works
when the computer is connected to AC power supply.
•Disabled - Does not allow the system to power on by special
LAN signals when it receives a wake-up signal from the
LAN or wireless LAN.
•LAN Only - Allows the system to be powered on by special
LAN signals.
This option is Disabled by default.
POST Behavior
Numlock LEDAllows you to enable or disable the Numlock feature when your
computer starts. This option is enabled by default.
Keyboard ErrorsAllows you to enable or disable the keyboard error reporting
when the computer starts. This option is enabled by default.
POST HotkeysAllows you to specify the function keys to display on the screen
when the computer starts.
Enable F12 — Boot menu (enabled by default(
62