Dell 4320 Projector Accessories User Manual


 
PROJECTOR SETTINGSSelect and press to activate projector settings. The
projector settings menu provides the following options:
AUTO SOURCESelect Off (the default) to lock the current input signal. If
you press the Source button when the Auto Source mode is set to Off, you
can manually select the input signal. Select On to auto detect the available
input signals. If you press the Source button when the projector is on, it
automatically finds the next available input signal.
AUTO KEYSTONESelect On to automatically adjust image distortion
caused by tilting the projector.
PROJECTOR MODEAllows you to select the projector mode, depending
upon how the projector is mounted.
•Rear Projection-Desktop — The projector reverses the image so that you
can project from behind a translucent screen.
•Rear Projection-Ceiling Mount — The projector reverses and turns the
image upside down. You can project from behind a translucent screen with
a ceiling-mounted projection.
•Front Projection-Desktop — This is the default option.
•Front Projection-Ceiling Mount — The projector turns the image upside
down for ceiling-mounted projection.
SPEAKERSelect On to enable the speaker. Select Off to the disable
speaker.
CLOSED CAPTIONSelect On to enable close caption and activate the
closed caption menu. Select appropriate closed caption options: CC1,
CC2, CC3, and CC4.
NOTE: Closed caption option is available for NTSC only.
Using Your Projector 48