Filter
Top Products
18
APRIL 2008
MSTP INTEROPERABILITY OF THE DELL™ POWERCONNECT™ 6200 SERIES SWITCHES
WITH CISCO IOS AND CISCO CATOS-BASED SWITCHES
VIEWING THE MSTP STATUS
You can view the MSTP Region configuration on the three bridges by using the following command:
show spanning-tree mst configuration
The command is the same on the Dell and Cisco switches.
To perform the same configuration by using the Web interface, go to the Switching > VLAN >
VLAN Membership page, and add port 5 as an access ports in VLAN 10. Ethernet traffic on
this port will be untagged.