Filter
Top Products
PowerConnect 6224/6224F/6224P/6248/6248P Release Notes
System Firmware Version 3.2.0.6 Page 15
Deprecated Commands and Parameters
The following CLI commands have been deprecated since the 2.x release.
Title Description
bridge address
Interface Configuration mode
Rationale: The following parameters have been deprecated:
• delete-on-reset
• delete-on-timeout
• secure
ip dhcp filtering
Global Configuration mode
Rationale: The ip dhcp filtering command has been deprecated. It has
been replaced by the ip dhcp snooping command.
ip multicast staticroute
Global Configuration mode
Rationale: The ip multicast staticroute command has been deprecated. It
has been replaced by the ip mroute command.
ip dhcp filtering trust
Interface Configuration mode
Rationale: The ip dhcp filtering trust command has been deprecated. It
has been replaced by the ip dhcp snooping trust command.
show ip dhcp filtering
Privileged EXEC mode
Rationale: The show ip dhcp filtering command has been deprecated. It
has been replaced by the show ip dhcp snooping command.
mdix
Interface Configuration mode
Rationale: The mdix { auto | on } command has been deprecated.
Crossover is always automatically detected on ports.
port security
Interface Configuration mode
Rationale: The following parameters have been deprecated:
• forward
• discard-shutdown
logging buffered size
Global Configuration mode
Rationale: The logging buffered size command has been deprecated.
The buffer size is now fixed at 400 entries.
rmon table-size history
Global Configuration mode
Rationale: The rmon table-size history command has been deprecated.
The RMON history table size is now fixed at 270.
rmon table-size log
Global Configuration mode
Rationale: The rmon table-size log command has been deprecated. The
RMON log table size is now fixed at 100.
spanning-tree bpdu filtering
Global Configuration mode
Rationale: The spanning-tree bpdu filtering command has been
deprecated. It has been replaced by the no spanning-tree
bpdu flooding command.
MSTP Mode
MST mode
Rationale: The abort and show commands in MST Configuration mode
have been deprecated.