Filter
Top Products
Stacking Dell PowerConnect 7000 Series Switches
Page 14
9. In the Interface field, select VLAN 1000. In the Routing Mode field, select Enable. In the IP
Address Configuration Method field, select Manual. In the IP Address field, enter
192.168.21.11. In the Subnet Mask field, enter 255.255.255.0. Click Apply.
10. Navigate to the System > Management Security > Access Profile page. Choose the Add Profile
tab. Enter MGMT_VLAN in the Access Profile Name field. Select the Interface check box and
the VLAN radio button. Choose 1000 in the VLAN drop down. Enable the Source IP Address
check box and enter 192.168.21.0 in the Source Ip Address field. Enter 255.255.255.0 in the
Network Mask field. Ensure that the Action field is set to Permit and set the Rule Priority
field to 1.