Filter
Top Products
Stacking Dell PowerConnect 7000 Series Switches
Page 31
Small Configuration
• 6 switches stacked
• 4 VLANs, all ports are members of all VLANs
• 2/2 static/dynamic lags with 8 members each
• 1 MSTP instance with VLANs
• 15 ACLs applied on 15 interfaces
• 5 Diffserv service interfaces with policies on 5 interfaces
• 2 VLAN routing interfaces
• 16 L2 Multicast group entries
• 256 ARP entries
• 16 Unicast routes
Parameter
Timing
L2 loss duration (non-failed or rerouted stack member)
0 msec
L2 loss duration (failed/rerouted stack member)
10 msec
L3 loss duration (failed/rerouted stack member) 12 msec
IPMC loss duration (failed/rerouted stack member)
12 msec
L2 convergence time
14.770 sec
L3 convergence time
14.800 sec
IPMC convergence time
17.540 sec
Total convergence time 17.540 sec
Stacking CLI Commands
The following stacking commands are available from the CLI. See the CLI Reference Guide for more
detailed information about the commands.
boot auto-copy-sw
clear checkpoint statistics
initiate failover
member
movemanagement
nsf
set description
show checkpoint statistics
show nsf
show stack-standby
show switch stack-ports
show switch stack-ports counters
show switch stack-ports diag
show supported switchtype
show switch
stack-port
switch renumber