Volume Copy Using the vol copy Command Set15-1
&+$37(5
9ROXPH&RS\8VLQJWKHYROFRS\
&RPPDQG6HW
$ERXW7KLV&KDSWHU
2YHUYLHZRI9ROXPH&RS\
The filer can copy data from one volume to another volume at a given time. The result
of copying a volume is an off-line volume containing the same data as the source filer
at the time you initiated the copy operation.
,QWURGXFWLRQWRWKH)LOHU·V&RPPDQGVIRU
&RS\LQJ9ROXPHV
3XUSRVHVRIWKHYROFRS\&RPPDQG6HW
The
vol copy
command set enables you to copy one volume to another. The com-
mands in this command set control copying both data in the active file system and
data in snapshots from one volume to another. The source and destination volumes of
the copy can reside on the same filer or on different filers.
For more information about snapshots, see Chapter 9, Snapshots.
:KHQWR&RS\9ROXPHV
Table 15-1 describes some situations where you might find copying volumes useful.