Filter
Top Products
Command ReferenceA-161
7. If a disk shelf reports errors, notification is sent with SHELF_FAULT!!!. This
event also sends the short note mail.
8. If one of the power supplies in the filer fails, notification is sent with
POWER_SUPPLY_DEGRADED!!!. This event also sends the short note
mail.
9. If the system shuts down because it has detected that the temperature
inside the filer is too high, notification is sent with
OVER_TEMPERATURE_SHUTDOWN!!!. This event also sends the short
note mail.
10. System reboot notification is sent with REBOOT. This event also sends the
short note mail.
The setup command does the following for the autosupport feature:
If an adminhost is specified, it adds an entry for mailhost with the same
address as the adminhost to the /etc/hosts file.
The following information is sent:
1. Generation date and time stamp
2. Software version
3. System ID
4. Hostname
5. SNMP contact name (if specified)
6. SNMP location (if specified)
7. Output from sysconfig -v
8. The system serial number, if the system has one.
9. Currently held license codes
10. Output from options
11. Output from ifconfig -a
12. Output from nfsstat -c
13. Output from cifs stat, cifs sessions, and cifs shares; included if CIFS is
licensed.
14. Output from httpstat
15. Output from df
16. Output from df -i
17. Output from snap sched
autosupport