Dell AP-92 Network Card User Manual


 
10
The plastic case physically encloses the complete set of hardware and software components and represents
the cryptographic boundary of the module.
The Access Point configuration tested during the cryptographic module testing included:
Aruba Part Number
Dell Corresponding Part Number
AP-93-F1
W-AP93-F1
The exact firmware versions tested were:
ArubaOS_6xx_6.1.2.3-FIPS
Dell_PCW_6xx_6.1.2.3-FIPS
2.2.1.1 Dimensions/Weight
The AP has the following physical dimensions:
120 mm x 130 mm x 35 mm (4.7" x 5.1" x 1.4")
255 g (9 oz)
2.2.1.2 Interfaces
The module provides the following network interfaces:
1 x 10/100/1000 Base-T Ethernet (RJ45) Auto-sensing link speed and MDI/MDX
Antenna (internal)
1 x RJ-45 console interface
The module provides the following power interfaces:
48 V DC 802.3af power over Ethernet
12 V DC for external AC supplied power (adapter sold separately)
2.2.1.3 Indicator LEDs
There are 4 bicolor (power, ENET and WLAN) LEDs which operate as follows:
Table 3- AP-93 Indicator LEDs
Label
Function
Action
Status
PWR
AP power / ready status
Off
No power to AP
Red
Initial power-up condition
Flashing Green
Device booting, not ready
On Green
Device ready
ENET
Ethernet Network Link
Status / Activity
Off
Ethernet link unavailable
On Amber
10/100Mbs Ethernet link
negotiated
On Green
1000Mbs Ethernet link negotiated