Filter
Top Products
14
2.4.1 Physical Description
The Aruba AP-175 Access Point is a multi-chip standalone cryptographic module consisting of hardware
and software, all contained in a hard case. The module contains two 802.11 a/b/g/n transceivers, and 4 x N-
type female interfaces (2 x 2.4 GHz, 2 x 5 GHz) for external antenna support (supports MIMO)
The hard case physically encloses the complete set of hardware and software components and represents
the cryptographic boundary of the module.
The Access Point configuration tested during the cryptographic module testing included:
Aruba Part Number
Dell Corresponding Part Number
AP-175P-F1
W-AP175P-F1
AP-175AC-F1
W-AP175AC-F1
AP-175DC-F1
W-AP175DC-F1
The exact firmware versions tested were:
ArubaOS_6xx_6.1.2.3-FIPS
Dell_PCW_6xx_6.1.2.3-FIPS
2.4.1.1 Dimensions/Weight
The AP has the following physical dimensions:
260 mm x 240 mm x 105 mm (10.2" x 9.4" x4.1")
3.25 kg (7 lb)
2.4.1.2 Interfaces
The module provides the following network interfaces:
1 x 10/100/1000 Base-T Ethernet (RJ45) Auto-sensing link speed and MDI/MDX
Antenna
o 4 x N-Type female antenna interfaces
1 x RJ-45 console interface
The module provides the following power interfaces:
AP-175P: 48-volt DC 802.3at power over Ethernet (PoE+)
AP-175AC: 100-240 volt AC from external AC power source
AP-175DC: 12-48 volt DC from external DC power source