Dell AP-92 Network Card User Manual


 
12
2.3.1 Physical Description
The Aruba AP-105 Access Point is a multi-chip standalone cryptographic module consisting of hardware
and software, all contained in a hard plastic case. The module contains two dual-band 2.4-GHz/5-GHz
802.11 a/b/g/n transceivers, and 4 x integrated, omni-directional antenna elements (supporting up to 2x2
MIMO with spatial diversity).
The plastic case physically encloses the complete set of hardware and software components and represents
the cryptographic boundary of the module.
The Access Point configuration tested during the cryptographic module testing included:
Aruba Part Number
Dell Corresponding Part Number
AP-105-F1
W-AP105-F1
The exact firmware versions tested were:
ArubaOS_6xx_6.1.2.3-FIPS
Dell_PCW_6xx_6.1.2.3-FIPS
2.3.1.1 Dimensions/Weight
The AP has the following physical dimensions:
132 mm x 135 mm x 45 mm (5.2" x 5.3" x 1.8")
0.3 kg (10.56 oz)
2.3.1.2 Interfaces
The module provides the following network interfaces:
1 x 10/100/1000 Base-T Ethernet (RJ45) Auto-sensing link speed and MDI/MDX
Antenna (internal)
1 x RJ-45 console interface
The module provides the following power interfaces:
48 V DC 802.3af power over Ethernet
12 V DC for external AC supplied power (adapter sold separately)
2.3.1.3 Indicator LEDs
There are 4 bicolor (power, ENET and WLAN) LEDs which operate as follows:
Table 4- AP-105 Indicator LEDs
Label
Function
Action
Status
PWR
AP power / ready status
Off
No power to AP
Red
Initial power-up condition
Flashing Green
Device booting, not ready
On Green
Device ready