Filter
Top Products
48 Printing
www.dell.com | support.dell.com
4 Select Manual paper from the Paper tray drop-down list.
5 Select the appropriate Paper size and type.
6 Click OK.
7 Click OK on the Print window to send the job to print.
The printer displays the Load Manual Feeder light sequence.
8 Place a sheet of the selected print media, print side facing up, at the center of the manual
feeder, but only to the point where its leading edge can contact the paper guides.
• Hold transparencies by the edges and avoid touching the print side. Oil from your
fingers can affect print quality.
• Insert envelopes with the flap side face down and with the stamp area as shown.
• Load letterhead face up, with the top of the sheet first.
• If you experience problems with paper feed, turn the paper over.
9 Adjust the paper guides to the print media’s width.
10 Hold both sides of the print media close to the manual feeder, and push it into the printer
until it automatically engages.
There is a brief pause between the time the printer engages the print media and when it
feeds into the printer.
NOTICE: Do not force the print media into the feeder. Forcing the media causes jams.