Filter
Top Products
60 Installing System Components
Figure 3-10. Attaching a SAS Hard Drive to a SAS Controller Expansion Card
7
Close the system. See "Closing the System" on page 46.
8
Enter the System Setup program and ensure that the hard drive’s
controller is enabled. See "Entering the System Setup Program" on
page 24.
9
Exit the System Setup program and reboot the system.
10
Partition and logically format the drive.
See the documentation that came with the drive for instructions on
installing any software required for drive operation.
Removing a 3.5-Inch Hard Drive From a Hard-Drive Bracket
Detach the hard-drive bracket from the hard drive by pushing out the edges
of the bracket and removing the hard drive. See Figure 3-11.
1 SAS hard drive 2 power/data cable
3 data cable 4 SAS controller card
3
4
1
2