Filter
Top Products
Cabling Your Cluster Hardware 23
Cabling One iSCSI SAN-Attached Cluster to a Dell|EMC AX4-5i Storage System
1
Connect cluster node 1 to the iSCSI network.
a
Connect a network cable from iSCSI NIC 0 (or NIC port 0) to the
network switch 0 (sw0).
b
Connect a network cable from iSCSI NIC 1 (or NIC port 1) to the
network switch 1 (sw1).
2
Repeat step 1 for each cluster node.
3
Connect the storage system to the iSCSI network.
a
Connect a network cable from the network switch 0 (sw0) to SP-A
iSCSI port 0.
b
Connect a network cable from the network switch 0 (sw0) to SP-B
iSCSI port 1.
c
Connect a network cable from the network switch 1 (sw1) to SP-A
iSCSI port 1.
d
Connect a network cable from the network switch 1 (sw1) to SP-B
iSCSI port 0.