Filter
Top Products
Troubleshooting 45
The cluster network
name is not
responding on the
network because the
Internet Connection
Firewall is enabled on
one or more nodes.
Configure the Internet
Connection Firewall to allow
communications that are
required by MSCS and the
clustered applications
or services.
For more information, see
Microsoft Knowledge Base
article KB883398 at the
Microsoft Support website at
support.microsoft.com.
You are prompted to
configure one network
instead of two during
MSCS installation.
The TCP/IP
configuration
is incorrect.
The node-to-node network and
public network must be assigned
static IP addresses on different
subnets.
The private (point-to-
point) network is
disconnected.
Ensure that all systems are
powered on so that the NICs in
the private network
are available.
Using Microsoft
Windows NT
®
4.0 to
remotely administer a
Windows Server 2003
cluster generates error
messages.
Normal. Some
resources in Windows
Server 2003 are not
supported in
Windows NT 4.0.
Dell strongly recommends that
you use Windows XP
Professional or Windows Server
2003 for remote administration
of a cluster running Windows
Server 2003.
Table A-1. General Cluster Troubleshooting (continued)
Problem Probable Cause Corrective Action