Filter
Top Products
32 Preparing Your Systems for Clustering
4
In the
Choose Language Setup
screen, select the required language, and
click
OK
.
5
In the
Welcome
window of the setup wizard, click
Next
.
6
In the
CLARiiON AX-series
window, select
PowerPath
and click
Next
.
Follow the on-the-screen instructions to complete the installation.
7
Click
Yes
to reboot the system.
Configuring the Shared Storage System
To install and configure the Dell|EMC storage system in your cluster:
1
Install and use Navisphere Storage System Initialization Utility from a
node or management station to initialize your AX4-5i storage system.
During initialization, configure the network settings and create a user
account to manage the AX4-5i storage system from the network.
2
If applicable, install the expansion pack using Navisphere Express.
3
Install the Navisphere Server Utility on each cluster node.
4
Configure the iSCSI Initiator on each cluster node.
5
Assign the virtual disks to the cluster nodes.
Installing the Navisphere Storage System Initialization Utility
The Navisphere Storage System Initialization Utility provides a user interface
to initialize your AX4-5i storage system. Using the utility, you can configure
the IP address, subnet mask, default gateway address for the storage system’s
SPs, and assign user names and passwords for storage system access.
To install the software from the support media that is shipped with the
storage system:
1
Insert the support media in the CD/DVD drive of the cluster node or the
management station.
2
If prompted, select the language.
3
Click
Install Products
.
4
From the
Install Products
menu, click
Navisphere Storage System
Initialization Utility
.