Filter
Top Products
Replacing the camera
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure for replacing the 3D camera
1 Connect the camera cable to the camera.
2 Slide the camera into the camera bracket.
3 Align the notch on the camera bracket with the tab on the display bezel.
4 Align the screw holes on the camera assembly with the screw holes on
the display bezel.
5 Replace the screws that secure the camera assembly to the display bezel.
6 Adhere the foil over the camera assembly.
Procedure for replacing the 2D camera
1 Connect the camera cable to the camera and turn it over.
2 Slide the camera into the camera bracket.
3 Align the screw holes on the camera assembly with the screw holes on
the display bezel.
4 Replace the screws that secure the camera assembly to the display bezel.
Post-requisites
1 Replace the back cover.
2 Replace the computer base.
3 Replace the wireless card.
4 Replace the base cover.
66