Filter
Top Products
Removing the stand assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Prerequisites
1 Remove the base cover.
2 Remove the wireless card.
3 Remove the computer base.
4 Remove the back cover.
5 Remove the camera.
6 Remove the microphones.
Procedure
1 Disconnect the converter-board cable and control-buttons board cable
from the converter board.
2 Disconnect the power-button cable from the control-buttons board
cable.
76