Filter
Top Products
Replacing the power-button
module
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer. After working inside your
computer, follow the instructions in After working inside your
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1 Slide the power-button module into the slot on the display bezel.
2 Adhere the tape over the power-button module.
3 Route the power-button module cable through its routing guide.
4 Connect the power-button cable to the control-buttons board cable.
5 Replace the screw that secures the power-button cable to the middle
cover.
Post-requisites
1 Replace the back cover.
2 Replace the computer base.
3 Replace the wireless card.
4 Replace the base cover.
75