Dell L401X Personal Computer User Manual


 
Back to Contents Page
Coin-Cell Battery
Dell™XPS™L401XServiceManual
Removing the Coin-Cell Battery
Replacing the Coin-Cell Battery
Removing the Coin-Cell Battery
1. Follow the instructions in Before You Begin.
2. Remove the battery (see Removing the Battery).
3. Remove the memory module(s) (see Removing the Memory Module(s)).
4. Remove the hard drive (see Removing the Hard Drive).
5. Follow the instructions from step 4 to step 6 in Removing the Optical Drive.
6. Remove the palm-rest assembly (see Removing the Palm-Rest Assembly).
7. Disconnect the coin-cell battery cable from the system-board connector.
8. The coin-cell battery is glued to a slot on the top cover. Using a plastic scribe, gently pry the coin-cell battery off the slot.
Replacing the Coin-Cell Battery
1. Follow the instructions in Before You Begin.
2. Connect the coin-cell battery cable to the system-board connector.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: Onlyacertifiedservicetechnicianshouldperformrepairsonyourcomputer.DamageduetoservicingthatisnotauthorizedbyDell™
is not covered by your warranty.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside the
computer.
1
coin-cell battery
2
coin-cell battery cable