Filter
Top Products
Back to Contents Page
Internal Card With Bluetooth®Wireless Technology
Dell™XPS™M1730ServiceManual
Removing the Card With Bluetooth®Wireless Technology
Replacing the Card With Bluetooth®Wireless Technology
If you ordered a card with Bluetooth wireless technology with your computer, it is already installed. The Bluetooth wireless technology card is located in the
battery compartment.
Removing the Card With Bluetooth®Wireless Technology
1. Follow the procedures in Before You Begin.
2. Ground yourself by touching one of the metal connectors on the back of the computer.
3. Pull the card out of the battery compartment so that you can disconnect the card from its cable and remove it from the computer.
Replacing the Card With Bluetooth®Wireless Technology
1. Connect the card to the cable and insert it into the compartment.
2. Replace the battery.
Back to Contents Page
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as a connector on the back of the computer).
NOTICE: To help prevent damage to the system board, you must remove the battery from the battery bay before you begin working inside the
computer.
NOTE: If you leave the area, ground yourself again when you return to the computer.
1
internalcardwithBluetooth™Wirelesstechnology
2
cable
3
bluetooth compartment