Filter
Top Products
I/O Card InstallationRev 1.0
Mellanox Technologies
16
The kit includes:
Figure 5: Installation Kit Parts
4.3 Installation Instructions
Remove the server from the chassis.
1. Connect an ESD strap to your wrist and to a valid ESD ground.
2. Push the latch and pull on the handle.
Table 9 - ConnectX® Dual-Port InfiniBand I/O Card Installation Kit
1 I/O Card 1 connector board
3 flathead screws 1 plastic leg
3 panhead screws
x3
x3