Filter
Top Products
ConnectX®-2 Dual Port VPI I/O Card for Dell C6100 Rev 1.0
Mellanox Technologies
17
Figure 6: Removing From the Server
3. Remove the server and place on a work bench.
4. Above the handle are screws holding on the faceplate.
5. Remove these screws and discard.
6. Remove the two screws on the top side of the server and discard.
Figure 7: Top View
7. Remove the faceplate.
8. Push the plastic leg onto the board.
Push here
Pull handle
Screws holding the faceplate
Screws in top