Filter
Top Products
I/O Card InstallationRev 1.0
Mellanox Technologies
18
Figure 8: Install the Plastic Leg onto the Board
9. Push the Connector board into the card. The connector board must be installed as seen in
Figure 9, directed toward the back of the server.
Figure 9: Installing the Connector Board into the HCA Card
10. Put the card into place in the server, catching the cages into the front panel of the server. The
metal leg must go inside of the server and line up with the hole in the side of the server. Also
push the connector board into the socket in the server.
11. Screw in a flat head screw for the metal leg.
Figure 10: Dell Card Installed
Install a flathead screw
through the server into the
metal leg.