Filter
Top Products
19
PARTS OF THE MS6130 HAND-HELD BAR CODE SCANNER
Becoming familiar with the features of the MS6130 hand-held scanner will
help when operating one of these scanners. The illustration and list explain
the pertinent parts.
Figure 4: Scanner Parts
Battery Charge Contacts Receptacle for the battery charger.
Reactivation Switch Turns the unit on after a timeout. Press the
button from the bottom.
Green and Red LEDs When the red LED is on, the laser is on. If the
green LED flashes on, the scanner has read a
bar code successfully. Communication to the
host is complete when the receiver beeps.
Infrared Object Sensor When a specified time has elapsed without any
scanning, the unit will enter a “standby” mode.
To reactivate the unit, remove the current
object and present an object in front of the
output window again.
Output Window This aperture emits laser light.
Reactivation
Switch
Green and Red LED
Output
Window
Infra-red (IR)
Senso
r
Replaceable
Batter
y
Pack
Battery Charge
Contacts