Dell N4010 Laptop User Manual


  Open as PDF
of 53
 
Back to Contents Page
Daughter Board
Dell™Inspiron™N4010ServiceManual
Removing the Daughter Board
Replacing the Daughter Board
Removing the Daughter Board
1. Follow the instructions in Before You Begin.
2. Remove the battery (see Removing the Battery).
3. Follow the instructions from step 4 to step 15 in Removing the System Board.
4. Remove the Mini-Card(s) (see Removing the Mini-Card(s)).
5. Remove the display assembly (see Removing the Display Assembly).
6. Remove the middle cover (see Removing the Middle Cover).
7. Remove the five screws that secure the daughter board to the computer base.
8. Lift the daughter board out of the computer base.
Replacing the Daughter Board
1. Follow the instructions in Before You Begin.
2. Align the connectors on the daughter board with the slots on the computer base.
3. Replace the five screws that secure the daughter board to the computer base.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: Onlyacertifiedservicetechnicianshouldperformrepairsonyourcomputer.DamageduetoservicingthatisnotauthorizedbyDell™
is not covered by your warranty.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside the
computer.
1
daughter board
2
screws (5)
 previous next