Filter
Top Products
5. Make a note of the display cable routing on the display cover.
6. Turn the display panel over and place it on a clean surface.
7. Lift the tape that secures the display cable to the display board connector and disconnect the display cable.
8. Remove the six screws (three on each side) that secure the display panel brackets to the display panel.
Replacing the Display Panel
1. Follow the instructions in Before You Begin.
1
display cover
2
display panel
3
screws (6)
1
display cable
2
display board connector
3
tape
4
back of the display panel
1
screws (6)
2
display panel brackets (2)