Filter
Top Products
Replacing the System Badge | 15
Replacing the System Badge
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
"Before Working Inside
Your Computer" on page 7. After working inside your computer, follow the
instructions in "After Working Inside Your Computer" on page 9. For additional
safety best practices information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Procedure
1 Slide the tab on the system badge into the slot on the base-cover assembly
and snap the system badge into place.
2 Turn the base-cover assembly over.
3 Adhere the Mylars that secure the system badge to the base-cover assembly.
Postrequisites
Replace the base-cover assembly. See "Replacing the Base-Cover Assembly" on page 12.