Filter
Top Products
24 | Removing the Speakers
Removing the Speakers
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
"Before Working Inside
Your Computer" on page 7. After working inside your computer, follow the
instructions in "After Working Inside Your Computer" on page 9. For more
safety best practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Prerequisites
1 Remove the base-cover assembly. See "Removing the Base-Cover Assembly" on
page 10.
2 Remove the battery. See "Removing the Battery" on page 16.
Procedure
1 Disconnect the speaker cable from the system board.
2 Note the speaker-cable routing and remove the cable from the routing guides.
3 Remove the screw that secures the speakers to the palm-rest assembly.
4 Lift the speakers, along with the speaker cable, off the palm-rest assembly.
1 speaker cable 2 screw
3 speakers (2)
2
1
3