Filter
Top Products
26 | Removing the Wireless Card
Removing the Wireless Card
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
"Before Working Inside
Your Computer" on page 7. After working inside your computer, follow the
instructions in "After Working Inside Your Computer" on page 9.
For more safety best practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Prerequisites
1 Remove the base-cover assembly. See "Removing the Base-Cover Assembly" on
page 10.
2 Remove the battery. See "Removing the Battery" on page 16.
Procedure
1 Remove the screw that secures the wireless-card bracket and wireless card to the
palm-rest assembly.
2 Disconnect the antenna cables from the wireless card.
3 Slide and remove the wireless card from its connector on the I/O board.
1 screw 2 wireless-card bracket
3 antenna cables (2) 4 wireless card
3
1
4
2