Filter
Top Products
Replacing the NFC card | 19
Replacing the NFC card
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
"Before Working Inside
Your Computer" on page 7. After working inside your computer, follow the
instructions in "After Working Inside Your Computer" on page 9. For additional
safety best practices information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Procedure
1 Use the alignment posts on the palm-rest assembly to place the NFC card on the
palm-rest assembly.
2 Slide the NFC and antenna cables in the respective connectors on the NFC card
and press down on the connector latches to secure the cables.
3 Adhere the adhesive foams to the NFC card and NFC cable.
Postrequisites
1 Replace the battery. See "Replacing the Battery" on page 17.
2 Replace the base-cover assembly. See "Replacing the Base-Cover Assembly" on
page 12.