Filter
Top Products
Use To
8 2-Sided/Eco-Mode
Activate 2-Sided to:
• Print on both sides of the paper (duplex).
Activate Eco-Mode to:
• Print on both sides of the paper (duplex).
• Change to Power Saver mode after the printer is left
idle for 10 minutes.
• Set screen brightness to low.
9 Cancel
• Cancel a print, copy, or scan job in progress.
• Exit from a menu level of the Copy, Scan, Photo, or File
Print menu to the top level of a menu.
• Exit from a menu level of the Setup menu to the top
level of the previous mode.
• Clear current settings or error messages, and return to
default settings.
10 Arrow buttons
• Choose a menu or submenu item that appears on the
display.
11
Select
• Select menu options.
• Save settings.
• Feed or eject paper. Press and hold for 3 seconds to
feed or eject paper from the printer.
12
Display
Note: The display is turned off in Power Saver mode.
View:
• Printer status
• Messages
• Menus
13
Setup Access the setup menu and change printer settings.
Note: The Copy, Scan, and Photo button lights are off when
this button is selected.
Changing the Power Saver timeout
The Power Saver timeout is the time it takes for the printer to switch to Power Saver mode when the printer is left
idle. The Power Saver feature optimizes energy efficiency by reducing the printer power consumption (as much as
28 percent on some printer models) compared to the default printer settings. To save the most energy, select the
lowest Power Saver timeout.
1 From the printer control panel, press .
2 Press the up or down arrow button to scroll to Device Setup, and then press .
3 Press the up or down arrow button to scroll to Power Saver, and then press .
4 Press the up or down arrow button to select a Power Saver timeout, and then press .
Using the printer control panel buttons and menus
14