Filter
Top Products
104 Command Groups
match srcl4port Adds to the specified class definition a match
condition based on the source layer 4 port of a
packet using a single keyword, a numeric
notation, or a numeric range notation.
CMC
match vlan Adds to the specified class definition a match
condition based on the value of the layer 2
VLAN Identifier field.
CMC
mirror Mirrors all the data that matches the class
defined to the destination port specified.
PCMC
police-simple Establishes the traffic policing style for the
specified class.
PCMC
policy-map Establishes a new DiffServ policy or enters
policy map configuration mode.
GC
redirect Specifies that all incoming packets for the
associated traffic stream are redirected to a
specific egress interface (physical port or port-
channel).
PCMC
service-policy Attaches a policy to an interface in a particular
direction.
GC or
IC
show class-map Displays all configuration information for the
specified class.
PE
show classofservice dotlp-
mapping
Displays the current Dot1p (802.1p) priority
mapping to internal traffic classes for a specific
interface.
PE
show classofservice ip-
dscp-mapping
Displays the current IP DSCP mapping to
internal traffic classes for a specific interface.
PE
show classofservice trust Displays the current trust mode setting for a
specific interface.
PE
show diffserv Displays the DiffServ General Status
information.
PE
show diffserv service
interface
Displays policy service information for the
specified interface and direction.
PE
show diffserv service
interface port-channel
Displays policy service information for the
specified interface and direction.
PE
Command Description Mode
a
2CSPC4.XModular-SWUM200.book Page 104 Thursday, March 10, 2011 11:18 AM