Filter
Top Products
122 Command Groups
IPv6 Multicast
Command Description Mode
a
ipv6 pimsm (Global
Config)
Administratively enables PIMSM for IPv6
multicast routing.
GC
ipv6 pimsm (VLAN
Interface Config)
Administratively enables PIM-SM multicast
routing mode on a particular IPv6 router
interface.
IC
ipv6 pimsm bsr-border Prevents bootstrap router (BSR) messages from
being sent or received through an interface.
IC
ipv6 pimsm bsr-candidate Configures the router to announce its
candidacy as a bootstrap router (BSR).
GC
ipv6 pimsm dr-priority Sets the priority value for which a router is
elected as the designated router (DR).
IC
ipv6 pimsm hello-interval Administratively configures the PIM-SM Hello
Interval for the specified interface.
IC
ipv6 pimsm join-prune-
interval
Administratively configures the interface
join/prune interval for the PIM-SM router,
IC
ipv6 pimsm register-
threshold
Configures the Register Threshold rate for the
RP router to switch to the shortest path.
GC
ipv6 pimsm rp-address Statically configures the Rendezvous Point (RP)
address of a PIM for one or more multicast
groups.
GC
ipv6 pimsm rp-candidate Configures the router to advertise itself to the
bootstrap router (BSR) as a PIM candidate
rendezvous point (RP).
GC
ipv6 pimsm spt-threshold Configures the Data Threshold rate for the last-
hop router to switch to the shortest path on the
router.
GC
ipv6 pimsm ssm Defines the Source Specific Multicast (SSM)
range of multicast addresses.
GC
show ipv6 pimsm Displays global status of IPv6 PIMSM and its
IPv6 routing interfaces.
PE
show ipv6 pimsm bsr Displays the bootstrap router (BSR)
information.
PE
2CSPC4.XModular-SWUM200.book Page 122 Thursday, March 10, 2011 11:18 AM