8. Enter the System Setup and verify that the USB key is detected by the system.
Figure 20. Removing and Installing the Internal USB Key
1. USB memory key 2. USB memory key connector
Expansion Cards And Expansion-Card Risers
Expansion Card Installation Guidelines
NOTE: To use an expansion card, you need to install an expansion-card riser. If your system
configuration does not include the expansion-card riser, purchase a kit with the riser.
NOTE: If you are installing an expansion card, purchase and install fan 3.
Your system supports one of the following expansion cards:
• PCI Express Generation 3 expansion card.
• PERC H310/H710/H810
NOTE: When you install a PERC card, connect the data and power cables to the hard drive using a
PERC card cable adapter.
Expansion Card Types And Form Factor
The following table describes the types of expansions cards and the form factor:
Table 2. Expansion Card Types and Form Factor
Card Type Form Factor
FC8 HBA full height
SAS RAID full height
10 Gb NICs full height
1 Gb NICs full height
51