Adding and Replacing Parts 199
11
Before you rotate the card retainer back into place, ensure that:
• The tops of all cards and filler brackets are flush with the alignment
bar.
• The notch in the top of each card or filler bracket fits around the
alignment guide.
NOTE: For extra security, remove the alignment guide (an upside-down
screw) and screw it in right side up to secure a card.
1 card retainer 2 alignment bar
3 alignment guide
For extra security, remove the
alignment guide (an upside-down
screw) and screw it in right side up to
secure a card.
4 filler bracket
2
4
3
1