Filter
Top Products
About Your System 23
CAUTION: Only trained service technicians are authorized to remove the system
cover and access any of the components inside the system. See your Product
Information Guide for complete information about safety precautions, working
inside the computer, and protecting against electrostatic discharge.
NOTE: If your system fails to boot, press the System ID button for at least five
seconds until an error code appears on the LCD. Record the code, then see "Getting
Help" on page 165.
Table 1-5. LCD Status Messages
Code Test Causes Corrective Actions
N/A
SYSTEM NAME
A 62-character string that
can be defined by the user
in the System Setup
program.
The
SYSTEM NAME
displays under the
following conditions:
• The system is powered
on.
• The power is off and
active POST errors are
displayed.
This message is for
information only.
You can change the system
ID and name in the
System Setup program.
See "Using the System
Setup Program" on
page 41.
E1000 FAILSAFE,
CALL
SUPPORT
See "Getting Help" on
page 165.
E1114 Temp
Ambient
Ambient system
temperature is out of
acceptable range.
See "Troubleshooting
System Cooling" on
page 138.
E1116 Temp Memory
Memory has exceeded
acceptable temperature
and has been disabled to
prevent damage to the
components.
See "Troubleshooting
System Cooling" on
page 138.
E12nn xx PwrGd
Specified voltage regulator
has failed.
See "Getting Help" on
page 165.