Filter
Top Products
100
AUDIO/VIDEO ADJUST
Setting items Setting details
Speaker
Make settings for the
speakers outputting sound
when playing back in
DENON original surround
mode.
Surround Back : Sound is output from the surround back speakers.
Height : Sound is output from the front height speakers.
Wide : Sound is output from the front wide speakers.
OFF : Sound is not output from the surround back speakers, front wide
speakers and front height speakers.
NOTE
Only speakers that are set to something other than “None” in “Speaker
Config.” (vpage105) can be selected.
Subwoofer
Turn subwoofer output on
and off.
ON : The subwoofer is used.
OFF : The subwoofer is not used.
NOTE
This can be set when the surround mode is “DIRECT” (vpage55) and
the “Subwoofer Mode” (vpage106) is “LFE+Main”.
Default
The “Surround Parameters”
settings are returned to the
default settings.
Yes : Reset to the defaults.
No : Do not reset to the defaults.
When you select “Default” and press ENTER,
the “Return all settings to the default?”
prompt is displayed. Select either “Yes” or
“No”, and press ENTER.
n Tone
Adjust the tonal quality of the sound.
Setting items Setting details
Tone Control
Set the tone control function
to ON and OFF.
ON : Allow tone adjustment (bass, treble).
OFF : Playback without tone adjustment.
“Tone Control” can be set when “Dynamic EQ
®
” (vpage101) is
set to “OFF”.
NOTE
•“Tone Control” settings are not reflected to ZONE2 and ZONE3.
•The tone cannot be adjusted in the “DIRECT” mode.
Bass
Adjust low frequency range
(bass).
–6dB – +6dB
“Bass” can be set when “Tone Control” is set to “ON”.
Treble
Adjust high frequency range
(treble).
–6dB – +6dB
“Treble” can be set when “Tone Control” is set to “ON”.
Basic version
Advanced version
Information
Advanced version
vSee overleaf
BD