Denon AVR-3312CI Network Hardware User Manual


 
83
Playback
1
Press ZONE SELECT to switch the
zone mode to K (ZONE2) or L
(ZONE3).
Input source
select buttons
2
Press AMP to set the remote
control unit to AMP-operation
mode.
3
Press ZONE/DEVICE Z to turn on
the ZONE2 or ZONE3 power.
The or indicator on the
display lights.
•Also press input source select button when
in standby mode, the power turns on.
•When ZONE/DEVICE X is pressed, ZONE2
or ZONE3 turns off.
•Power in ZONE2 or ZONE3 can be turned
on or off by pressing ZONE2 ON/OFF or
ZONE3 ON/OFF on the main unit.
4
Press the input source select
button.
The audio signal of the selected source
is output to ZONE2 or ZONE3.
•To perform an operation with the main unit, press
ZONE2 / REC
SELECT
or ZONE3 SELECT many times.
When power for both MAIN ZONE and ZONE2 (ZONE3) is set to ON,
power of the MAIN ZONE only can be turned off. Select J (MAIN
ZONE) in step 1 then press ZONE/DEVICE X.
Adjusting the volume
Use M df to adjust the volume.
GAdjustable rangeH
– – –
–80dB – –40dB – 18dB
(When the “Volume Display” (vpage116) setting is “Relative”)
GAdjustable rangeH
0 41 99
(When the “Volume Display” (vpage116) setting is “Absolute”)
•At time of purchase, “Volume Limit” (vpage 115) is set to
“–10dB (71)”.
Turn MASTER VOLUME after pressing ZONE2 / REC SELECT or ZONE3
SELECT
on the main unit to adjust the sound volume.
Turning off the sound temporarily
Press N.
The sound is reduced to the level set at “Mute Level” (vpage115)
in the menu.
•To cancel, either adjust the volume or press N again.
•The setting is canceled when the zone’s power is turned off.
You can adjust the tone and volume for ZONE2 and ZONE3 in “Zone
Setup” (vpage115) in the menu.
Video output
Video Connection
The video signals of this unit’s ZONE2 video output terminal are
played by the ZONE2 TV.
VIDEO
IN
ZONE2
VIDEO
MAIN ZONE
ZONE2
This unit
NOTE
•It is not possible to output video signals input to the HDMI or
component terminals to ZONE2.
•The menu screen is not output.
Basic version
Advanced version
Information
Advanced version
vSee overleaf
BD