Filter
Top Products
19
Telephoning
An internal call is a call made to another subscriber on the same Eumex 504PC SE.
Such calls are not routed via public telephone exchanges and are thus not charged.
You can establish internal connections to connected analogue terminals as well as to
PCs. Calls between a PC and a fax terminal, or between a telephone and an answer-
phone set up on a PC are possible. The internal numbers from 20 to 29 are available
for the connected PC. These numbers are assigned to the PC using the communica-
tions software. For further details, please refer to the respective software user guide.
Automatic external line seizure (the default setting on delivery):
Lift the handset. You hear an external dialling tone.
Press the R-key.
Dial the desired internal number (11 to 14 or 20 to 29).
You hear an internal call signalling: the call is signalled on the internal subscriber’s
device.
Manual external line seizure:
Lift the handset. You hear the internal dialling tone.
Dial the desired internal number (11 to 14 or 20 to 29).
You hear internal call signalling: the call is signalled on the internal subscriber’s
device.
Note:
In order to be able to contact CAPI applications (communications software) internally
as well as externally, you have to assign the respective internal number (20 to 29) to
the MSN programmed in the corresponding communications software. A maximum
of three numbers can be assigned. You do this in the Configurator; see p. 78.
Making Internal Calls
Please note the difference between automatic and manual external line seizure
using the digit 0 in all dialling procedures from here on.
b
r
t
b
t